Compact Flash Duplicator - Choose Standard or Pro models.

The CF300 makes CF duplication fast, easy and convenient. It's compact design and efficient user interface allow the user to copy multiple CF drives without the lag or inconvenience of a PC. It copies 1 flash drive to 3 targets at up to 3.9GB per minute with no need to reset the machine between copies (plug and go). The CF300 is the most efficient low-cost solution on the market for copying CF drives.

• High speed copy supports up to 3.9GB/min per port
• Ergonomic design for easy operation.
• Quick socket swap module.
• Apply new advanced Multi-Core processor.
• Complete standalone system, no computer required.
• Supports all format, data size and memory card capacity bit for bit copy.
• Comply with USA Department of Defense (DoD) data security standard provides DoD Erase function.
• 4 kinds of professional quality diagnostic tools for Flash module.
• "A2 Fake Picker" shows accurate capacity of Memory card to get rid of low quality or fake flash media.
• "Speed Check" shows Reading and Writing speed of the Flash module within 8 seconds.
• "H3/H5 Media Check" shows the quantity of bad block though bit for bit examination.
• Quick data copy, copies only data contained areas.( Support FAT16/32, Linux ext2/ext3, NTFS)
• 2 second format, 3 models available for selection.
• Supports Synchronous and Asynchronous modes for Copy/Compare/ Erase/ Format function.
• Strict bit-by-bit hardware comparison further increases the reliability of duplication.
• User-friendly interface with real time information LCD display.
• Firmware upgrade available with well-experienced team support.

Additional Features In PRO Models:

• Event-log Reporting Function: Event Log Report is an important asset Management tool to assist users in monitoring and recording the whole duplication control process. The Event Log report records all details of each duplication task. For example, working time, run function, model number, serial number of media and results etc.


• Burn-in Test Function: To find out the durability of your Flash devices, you can select the Burn-In function. You can set how long and how many loops and duration of the Burn-In test. The range of the Burn-In time is between 30 mins to 30 days.


• Dual Source Compare Mode (DSCM): Dual source comparison mode can eliminate the chance of a duplication error caused by a worn or a source that is not 100% accurate. Use the first port as a copying source and use the second port as a backup/compare source. It will guarantee the highest reliability and 100% accuracy of the duplication process if your application demands it.


• Get ID (MID/OID/SN) Function: This function enables the copier to output the ID of the CF Card. This function is perfect for some software applications (i.e encryption applications) that requires unique ID.